1.3英寸 OLED 显示模块: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 10:55, 18 September 2026

Edit Product

OLED Display

0.96-inch OLED

Published

128*64 SSD1306 30pin

0.96-inch OLED Display 128*64 (blue) Main View

0.96-inch OLED Display 128*64 (blue) Auxiliary View

Introduction

0.96" 128x64 OLED Screen, Multi-interface, 30Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.

Specifications


Item	Specification
Size	0.96 inch OLED Screen
Resolution	128*64
Interface Type	SPI, IIC, 8-bit Parallel
Controller IC	SSD1306
Display Color	Blue
Active Area	21.744 × 10.864 (mm)
Panel Dimension	26.70 × 19.26 × 1.4 (mm)
Pixel Pitch	0.17 × 0.17 (mm)
Pixel Size	0.154 × 0.154 (mm)
Flex Cable Length	12.0 (mm)
Pin Count	30pin (0.5mm Top Contact Type)
Viewing Angle	Full Viewing Angle
Operating Temperature	-40 ~ 70℃

Hardware

1.Hardware Wiring

0.96" OLED (SSD1306, IIC Interface) ↔ Arduino Board

You need to use the OLED 30P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.

2.Compilation & Upload

Open the sample code, compile it, upload the code, and perform the final test.

Size

FAQ

Q1: What main controllers does this OLED screen support?

A1: It supports mainstream development boards such as Arduino, ESP32 and STM32, compatible with SPI, IIC and 8-bit parallel communication.

Q2: What color is this OLED screen? Which driver IC does it use?

A2: Only blue color available, equipped with SSD1306 driver IC.

Q3: What is the operating temperature range of this OLED? Is the flex cable soldering type?

A3: Operating temperature: -40℃ ~ 70℃. It adopts 30Pin 0.7mm soldering FPC flex cable.

Downloads

Demo

Esp8266 screen display 096 v10.zip

Download

Demo

Esp32 screen display 096 v10.zip

Download

Document

ZJY096-2864KLBEG42.pdf

Download

@@ Line 1: / Line 1: @@
-<noinclude>{{#default_form:产品二级页}}</noinclude>
+{{ProductInfo
-{{产品信息
+|title=0.96-inch OLED Display 128*64 (blue)
-|标题=1.3英寸 OLED 显示模块
+|model=0.96-inch OLED
-|型号=DEMO-OLED-013
+|status=Published
-|状态=已发布
+|module=OLED Display
-|所属模块=OLED Display Module
+|image1=0.96 oled-800-600-1.jpg
-|主图=Demo-oled-display.png
+|image2=0.96 oled-800-600-2.jpg
-|副图=Demo-oled-display.png
+|intro=128*64  SSD1306 30pin
-|简介=高对比度小尺寸 OLED 模块演示页，适合显示文本、图标和设备状态。
+|highlights=''0.96" 128x''64 OLED Screen, Multi-interface, 30Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.
-|产品要点=* 自发光显示，无需额外背光。
+|videoTitle=0.96-inch OLED
-* 小尺寸、低功耗，便于嵌入紧凑设备。
+|videoURL=https://youtu.be/EBgPYXZhjoQ
-* 支持简单的 I²C 连接方式。
+|specs={{{!}} class="wikitable"
-|显示尺寸=1.3 英寸
+{{!}}+
-|分辨率=128 × 64
+!Item
-|显示接口=I²C
+!Specification
-|触控方式=无
+{{!}}-
-|供电=3.3V
+{{!}}Size
-|外形尺寸=约 35 × 35 mm（演示）
+{{!}}0.96 inch OLED Screen
-|硬件说明=模块提供 VCC、GND、SCL 和 SDA 接口。使用前确认 I²C 地址与主控上拉电压。
+{{!}}-
-|使用说明=# 连接电源和 I²C 总线。
+{{!}}Resolution
-# 扫描并确认设备地址。
+{{!}}128*64
-# 加载匹配分辨率的驱动。
+{{!}}-
-# 绘制文本和图形以验证方向。
+{{!}}Interface Type
-|常见问题=; 扫描不到地址怎么办？
+{{!}}SPI, IIC, 8-bit Parallel
-: 检查供电、接地、SCL/SDA 是否接反以及上拉电阻。
+{{!}}-
-; 显示内容错位怎么办？
+{{!}}Controller IC
-: 确认控制器型号、分辨率和页寻址模式。
+{{!}}SSD1306
-|显示模式={{{显示模式|详情}}}
+{{!}}-
-|卡片页面={{{卡片页面|{{PAGENAME}}}}}
+{{!}}Display Color
-|卡片标题={{{卡片标题|}}}
+{{!}}Blue
-|卡片型号={{{卡片型号|}}}
+{{!}}-
-|卡片图片={{{卡片图片|}}}
+{{!}}Active Area
-|卡片替代文本={{{卡片替代文本|}}}
+{{!}}21.744 × 10.864 (mm)
+{{!}}-
+{{!}}Panel Dimension
+{{!}}26.70 × 19.26 × 1.4 (mm)
+{{!}}-
+{{!}}Pixel Pitch
+{{!}}0.17 × 0.17 (mm)
+{{!}}-
+{{!}}Pixel Size
+{{!}}0.154 × 0.154 (mm)
+{{!}}-
+{{!}}Flex Cable Length
+{{!}}12.0 (mm)
+{{!}}-
+{{!}}Pin Count
+{{!}}30pin (0.5mm Top Contact Type)
+{{!}}-
+{{!}}Viewing Angle
+{{!}}Full Viewing Angle
+{{!}}-
+{{!}}Operating Temperature
+{{!}} -40 ~ 70℃
+{{!}}}
+|hardware==== <span style="color: rgb(52, 176, 176);">1.Hardware Wiring</span> ===
+.96" OLED (SSD1306, IIC Interface) ↔ Arduino Board
+You need to use the OLED 30P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.
+=== <span style="color: rgb(52, 176, 176);">2.Compilation & Upload</span> ===
+Open the sample code, compile it, upload the code, and perform the final test.
+|usage=[[File:0.96 oled-800-600-3.jpg|center|thumb|800x800px]]
+|faq==== <span style="color: rgb(52, 176, 176);">Q1: What main controllers does this OLED screen support?</span> ===
+A1: It supports mainstream development boards such as Arduino, ESP32 and STM32, compatible with SPI, IIC and 8-bit parallel communication.
+=== <span style="color: rgb(52, 176, 176);">Q2: What color is this OLED screen? Which driver IC does it use?</span> ===
+A2: Only blue color available, equipped with SSD1306 driver IC.
+=== <span style="color: rgb(52, 176, 176);">Q3: What is the operating temperature range of this OLED? Is the flex cable soldering type?</span> ===
+A3: Operating temperature: -40℃ ~ 70℃. It adopts 30Pin 0.7mm soldering FPC flex cable.
+|dl1Type=Demo
+|dl1Name=Esp8266 screen display 096 v10.zip
+|dl1File=Esp8266 screen display 096 v10.zip
+|dl2Type=Demo
+|dl2Name=Esp32 screen display 096 v10.zip
+|dl2File=Esp32 screen display 096 v10.zip
+|dl3Type=Document
+|dl3Name=ZJY096-2864KLBEG42.pdf
+|dl3File=ZJY096-2864KLBEG42.pdf
+|displayMode={{{displayMode|详情}}}
+|cardPage={{{cardPage|{{PAGENAME}}}}}
+|displaySize=1.3 inch
+|resolution=128 × 64
+|interface=I²C
+|touch=无
+|power=3.3V
+|dimensions=Approx. 35 x 35 mm (demo)
 }}
+<noinclude>{{#default_form:ProductPage}}</noinclude>