1.3英寸 OLED 显示模块: Difference between revisions

Latest revision as of 23:54, 31 July 2026

OLED Display Module

TEST-OLED-096

Published

High-contrast compact OLED module demo page, suitable for displaying text, icons, and device status.(Standalone product 1)

Introduction

Self-emissive display, no additional backlight needed.
Compact size, low power consumption, easy to embed in tight devices.
Supports simple I2C connection.
Standalone product ID: 1.

Specifications

Specifications to be added.

Hardware

The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use.

Size

Connect power and the I2C bus.
Scan and confirm the device address.
Load the driver matching the resolution.
Draw text and graphics to verify orientation.

FAQ

What if the address cannot be scanned?: Check power, ground, SCL/SDA reversal, and pull-up resistors.
What if the display content is misaligned?: Confirm controller model, resolution, and page addressing mode.

Downloads

暂无Published资源，管理员可在产品表单中添加下载文件。

@@ Line 1: / Line 1: @@
-<noinclude>{{#default_form:产品二级页}}</noinclude>
+<noinclude>{{#default_form:ProductPage}}</noinclude>
-{{产品信息
+{{ProductInfo
-|标题=0.96-inch OLED Display
+|title=0.96-inch OLED Display
-|型号=TEST-OLED-096
+|model=TEST-OLED-096
-|状态=已发布
+|status=Published
-|所属模块=OLED Display Module
+|module=OLED Display Module
-|主图=Product-TEST-OLED-096.png
+|image1=Product-TEST-OLED-096.png
-|副图=Product-TEST-OLED-096.png
+|image2=Product-TEST-OLED-096.png
-|简介=高对比度小尺寸 OLED 模块演示页，适合显示文本、图标和设备状态。（独立产品 1）
+|intro=High-contrast compact OLED module demo page, suitable for displaying text, icons, and device status.(Standalone product  1)
-|产品要点=* 自发光显示，无需额外背光。
+|highlights=* Self-emissive display, no additional backlight needed.
-* 小尺寸、低功耗，便于嵌入紧凑设备。
+* Compact size, low power consumption, easy to embed in tight devices.
-* 支持简单的 I²C 连接方式。
+* Supports simple I2C connection.
-* 独立产品编号：1。
+* Standalone product ID: 1.
-|显示尺寸=1.3 英寸
+|displaySize=1.3 inch
-|分辨率=128 × 64
+|resolution=128 × 64
-|显示接口=I²C
+|interface=I²C
-|触控方式=无
+|touch=无
-|供电=3.3V
+|power=3.3V
-|外形尺寸=约 35 × 35 mm（演示）
+|dimensions=Approx. 35 x 35 mm (demo)
-|硬件说明=模块提供 VCC、GND、SCL 和 SDA 接口。使用前确认 I²C 地址与主控上拉电压。
+|hardware=The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use.
-|使用说明=# 连接电源和 I²C 总线。
+|usage=# Connect power and the I2C bus.
-# 扫描并确认设备地址。
+# Scan and confirm the device address.
-# 加载匹配分辨率的驱动。
+# Load the driver matching the resolution.
-# 绘制文本和图形以验证方向。
+# Draw text and graphics to verify orientation.
-|常见问题=; 扫描不到地址怎么办？
+|faq=; What if the address cannot be scanned?
-: 检查供电、接地、SCL/SDA 是否接反以及上拉电阻。
+: Check power, ground, SCL/SDA reversal, and pull-up resistors.
-; 显示内容错位怎么办？
+; What if the display content is misaligned?
-: 确认控制器型号、分辨率和页寻址模式。
+: Confirm controller model, resolution, and page addressing mode.
-|显示模式={{{显示模式|详情}}}
+|displayMode={{{displayMode|详情}}}
-|卡片页面={{{卡片页面|{{PAGENAME}}}}}
+|cardPage={{{cardPage|{{PAGENAME}}}}}
 }}