多接口嵌入式开发板: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 09:42, 1 August 2026

Edit Product

ESP8266

ESP8266 D1

Published

用于显示与接口实验的通用嵌入式Development Board演示页, 包含多种外设连接区域.(Standalone product 1)

ESP8266 board, compatible with multiple Arduino expansion boards Main View

ESP8266 board, compatible with multiple Arduino expansion boards Auxiliary View

Introduction

Provides display, serial bus, and general-purpose I/O expansion.
Suitable for driver verification, teaching, and prototyping.
Page does not correspond to any specific brand or commercial model.
Standalone product ID: 1.

Specifications

Specifications to be added.

Hardware

Development Board包含主控区, 存储区, 显示连接器, 调试接口和扩展排针.所有跳线操作应在断电状态完成.

Size

Connect the debugger or USB data cable.
选择对应工具链和Development Board配置.
Flash the interface self-test firmware.
Complete wiring and driver configuration per the target display module.

FAQ

What if unable to enter download mode?: Check boot button timing, USB driver, and data cable.
What if peripheral communication is unstable?: Verify logic levels, ground, bus speed, and terminal connections.

Downloads

PDF

ESP8266 D1.pdf

Download

@@ Line 1: / Line 1: @@
-<noinclude>{{#default_form:产品二级页}}</noinclude>
+{{ProductInfo
-{{产品信息
+|title=ESP8266 board, compatible with multiple Arduino expansion boards
-|标题=Arduino Control Board
+|model=ESP8266 D1
-|型号=TEST-ARD-MAIN-01
+|status=Published
-|状态=已发布
+|module=ESP8266
-|所属模块=开发板
+|image1=ESP8266-D1-800-1.jpg
-|主图=Product-TEST-ARD-MAIN-01.png
+|image2=ESP8266-D1-800-3.jpg
-|副图=Product-TEST-ARD-MAIN-01.png
+|intro=用于显示与接口实验的通用嵌入式Development Board演示页, 包含多种外设连接区域.(Standalone product  1)
-|简介=用于显示与接口实验的通用嵌入式开发板演示页，包含多种外设连接区域。（独立产品 1）
+|highlights=* Provides display, serial bus, and general-purpose I/O expansion.
-|产品要点=* 提供显示、串行总线和通用 I/O 扩展。
+* Suitable for driver verification, teaching, and prototyping.
-* 适合驱动验证、教学和原型搭建。
+* Page does not correspond to any specific brand or commercial model.
-* 页面不对应特定品牌或商业型号。
+* Standalone product ID: 1.
-* 独立产品编号：1。
+|displaySize=N/A
-|显示尺寸=不适用
+|resolution=N/A
-|分辨率=不适用
+|interface=RGB / SPI / HDMI (demo)
-|显示接口=RGB / SPI / HDMI（演示）
+|touch=External
-|触控方式=外接
+|power=5V USB-C
-|供电=5V USB-C
+|dimensions=Approx. 100 x 70 mm (demo)
-|外形尺寸=约 100 × 70 mm（演示）
+|hardware=Development Board包含主控区, 存储区, 显示连接器, 调试接口和扩展排针.所有跳线操作应在断电状态完成.
-|硬件说明=开发板包含主控区、存储区、显示连接器、调试接口和扩展排针。所有跳线操作应在断电状态完成。
+|usage=# Connect the debugger or USB data cable.
-|使用说明=# 连接调试器或 USB 数据线。
+# 选择对应工具链和Development Board配置.
-# 选择对应工具链和开发板配置。
+# Flash the interface self-test firmware.
-# 烧录接口自检固件。
+# Complete wiring and driver configuration per the target display module.
-# 按目标显示模块完成接线与驱动配置。
+|faq=; What if unable to enter download mode?
-|常见问题=; 无法进入下载模式怎么办？
+: Check boot button timing, USB driver, and data cable.
-: 检查启动按键时序、USB 驱动和数据线。
+; What if peripheral communication is unstable?
-; 外设通信不稳定怎么办？
+: Verify logic levels, ground, bus speed, and terminal connections.
-: 核对电平、接地、总线速度和终端连接。
+|dl1Type=PDF
-|显示模式={{{显示模式|详情}}}
+|dl1Name=ESP8266 D1.pdf
-|卡片页面={{{卡片页面|{{PAGENAME}}}}}
+|dl1File=DESPI-C02 SCH V1.0 (1).pdf
+|displayMode={{{displayMode|详情}}}
+|cardPage={{{cardPage|{{PAGENAME}}}}}
 }}
+<noinclude>{{#default_form:ProductPage}}</noinclude>