2.42-inch OLED Display: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 00:07, 17 September 2026

Edit Product

OLED Display

1.54-inch OLED

Published

128*64 SSD1309 24pin

1.54-inch OLED Display 128*64 (blue) Main View

1.54-inch OLED Display 128*64 (blue) Auxiliary View

Introduction

1.54" 128x64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.

Specifications


Item	Specification
Size	1.54 inch OLED Screen
Resolution	128*64
Interface Type	8-bit 68/80 Parallel, SPI, IIC
Controller IC	SSD1309
Display Color	Blue
Active Area	35.052 × 17.516 (mm)
Panel Dimension	42.04 × 27.22 × 1.45 (mm)
Pixel Pitch	0.274 × 0.274 (mm)
Pixel Size	0.254 × 0.254 (mm)
Flex Cable Length	36 (mm)
Pin Count	24pin (0.5mm Top Contact Type)
Viewing Angle	Full Viewing Angle
Operating Temperature	-40 ~ 70℃
Weight	3.28g

Hardware

1.Hardware Wiring

1.54" OLED (SSD1309, IIC Interface) ↔ Arduino Board

You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.

2.Compilation & Upload

Open the sample code, compile it, upload the code, and perform the final test.

Size

FAQ

Q1: What are the optional driver IC for this OLED screen? What is its resolution?

A1: Optional driver IC: SSD1309, with 128*64 resolution.

Q2: What interfaces does the screen support? What is the specification of the flex cable?

A2: It supports 8-bit 68**/80** parallel, SPI and IIC interfaces. 24pin, 0.5mm top-contact FPC flex cable with 36mm length.

Downloads

Document

1.54-ZJY154-2864KLBMG01.pdf

Download

@@ Line 1: / Line 1: @@
-<noinclude>{{#default_form:产品二级页}}</noinclude>
+{{ProductInfo
-{{产品信息
+|title=1.54-inch OLED Display 128*64 (blue)
-|标题=2.42-inch OLED Display
+|model=1.54-inch OLED
-|型号=TEST-OLED-242
+|status=Published
-|状态=已发布
+|module=OLED Display
-|所属模块=OLED Display Module
+|image1=1.54-oled-800-600-1.jpg
-|主图=Product-TEST-OLED-242.png
+|image2=1.54-oled-800-600-2.jpg
-|副图=Product-TEST-OLED-242.png
+|intro=128*64  SSD1309  24pin
-|简介=High-contrast compact OLED module demo page, suitable for displaying text, icons, and device status.(Standalone product  3)
+|highlights=''1.54" 128x''64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.
-|产品要点=* Self-emissive display, no additional backlight needed.
+|specs={{{!}} class="wikitable"
-* Compact size, low power consumption, easy to embed in tight devices.
+{{!}}+
-* Supports simple I2C connection.
+!Item
-* Standalone product ID: 3.
+!Specification
-|显示尺寸=1.3 inch
+{{!}}-
-|分辨率=128 × 64
+{{!}}Size
-|显示接口=I²C
+{{!}}1.54 inch OLED Screen
-|触控方式=无
+{{!}}-
-|供电=3.3V
+{{!}}Resolution
-|外形尺寸=Approx. 35 x 35 mm (demo)
+{{!}}128*64
-|硬件说明=The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use.
+{{!}}-
-|使用说明=# Connect power and the I2C bus.
+{{!}}Interface Type
-# Scan and confirm the device address.
+{{!}}8-bit 68**/80** Parallel, SPI, IIC
-# Load the driver matching the resolution.
+{{!}}-
-# Draw text and graphics to verify orientation.
+{{!}}Controller IC
-|常见问题=; What if the address cannot be scanned?
+{{!}}SSD1309
-: Check power, ground, SCL/SDA reversal, and pull-up resistors.
+{{!}}-
-; What if the display content is misaligned?
+{{!}}Display Color
-: Confirm controller model, resolution, and page addressing mode.
+{{!}}Blue
-|显示模式={{{显示模式|详情}}}
+{{!}}-
-|卡片页面={{{卡片页面|{{PAGENAME}}}}}
+{{!}}Active Area
+{{!}}35.052 × 17.516 (mm)
+{{!}}-
+{{!}}Panel Dimension
+{{!}}42.04 × 27.22 × 1.45 (mm)
+{{!}}-
+{{!}}Pixel Pitch
+{{!}}0.274 × 0.274 (mm)
+{{!}}-
+{{!}}Pixel Size
+{{!}}0.254 × 0.254 (mm)
+{{!}}-
+{{!}}Flex Cable Length
+{{!}}36 (mm)
+{{!}}-
+{{!}}Pin Count
+{{!}}24pin (0.5mm Top Contact Type)
+{{!}}-
+{{!}}Viewing Angle
+{{!}}Full Viewing Angle
+{{!}}-
+{{!}}Operating Temperature
+{{!}} -40 ~ 70℃
+{{!}}-
+{{!}}Weight
+{{!}}3.28g
+{{!}}}
+|hardware==== <span style="color: rgb(52, 176, 176);">1.Hardware Wiring</span> ===
+.54" OLED (SSD1309, IIC Interface) ↔ Arduino Board
+You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.
+=== <span style="color: rgb(52, 176, 176);">2.Compilation & Upload</span> ===
+Open the sample code, compile it, upload the code, and perform the final test.
+|usage=[[File:1.54-oled-800-600-3.jpg|center|thumb|800x800px]]
+|faq==== <span style="color: rgb(52, 176, 176);">Q1: What are the optional driver IC for this OLED screen? What is its resolution?</span> ===
+A1: Optional driver IC: SSD1309, with 128*64 resolution.
+=== <span style="color: rgb(52, 176, 176);">Q2: What interfaces does the screen support? What is the specification of the flex cable?</span> ===
+A2: It supports 8-bit 68**/80** parallel, SPI and IIC interfaces. 24pin, 0.5mm top-contact FPC flex cable with 36mm length.
+|dl3Type=Document
+|dl3Name=1.54-ZJY154-2864KLBMG01.pdf
+|dl3File=1.54-ZJY154-2864KLBMG01.pdf
+|displayMode={{{displayMode|详情}}}
+|cardPage={{{cardPage|{{PAGENAME}}}}}
+|displaySize=1.3 inch
+|resolution=128 × 64
+|interface=I²C
+|touch=无
+|power=3.3V
+|dimensions=Approx. 35 x 35 mm (demo)
 }}
+<noinclude>{{#default_form:ProductPage}}</noinclude>