2.42 inch oled Display

Edit Product

OLED Display

2.42-inch OLED

Published

128*64  SSD1309  24pin

Introduction

2.42" 128x64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.

Specifications

Item	Specification
Size	2.42 inch OLED Screen
Resolution	128*64
Interface Type	8-bit 68**/80** Parallel, SPI, IIC
Controller IC	SSD1309
Display Color	Blue
Active Area	55.01 × 27.49 (mm)
Panel Dimension	60.50 × 37.00 × 2.00 (mm)
Pixel Pitch	0.43 × 0.43 (mm)
Pixel Size	0.40 × 0.40 (mm)
Flex Cable Length	36 (mm)
Pin Count	24pin (0.5mm Top Contact Type)
Viewing Angle	Full Viewing Angle
Operating Temperature	-40 ~ 70℃

Hardware

1.Hardware Wiring

2.42" OLED (SSD1309, IIC Interface) ↔ Arduino Board

You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.

2.Compilation & Upload

Open the sample code, compile it, upload the code, and perform the final test.

Size

FAQ

Q1: What is the driver IC of this OLED screen? What is its resolution?

A1: It adopts SSD1309 driver IC with 128*64 resolution.

Q2: What interfaces does the screen support? What is the specification of the flex cable?

A2: It supports 8-bit 68**/80** parallel, SPI and IIC interfaces. 24pin, 0.5mm top-contact FPC flex cable with 36mm length.

Downloads

Document

2.42-ZJY242-2864ALBPG01.pdf

Download