Raspberry Pi Sensor HAT: Difference between revisions

Revision as of 23:43, 31 July 2026

Raspberry Pi MHS & GPIO Display

TEST-RPI-EXP-03

已发布

Compact touchscreen display demo page connected via GPIO header, suitable for device panels and prototype validation.(Standalone product 3）

产品介绍

Direct header connection, reducing external adapter cables.
Integrated resistive touch area, suitable for menus and status operations.
Provides a maintainable unified product documentation structure.
Standalone product ID: 3。

产品参数

项目	参数
型号	TEST-RPI-EXP-03
所属模块	Raspberry Pi MHS & GPIO Display
显示尺寸	3.5 inch
分辨率	480 × 320
显示接口	GPIO / SPI
触控方式	Resistive touch
供电	3.3V / 5V GPIO
外形尺寸	Approx. 86 x 56 mm (demo)

硬件说明

The module draws power and transmits display/touch signals via dual-row GPIO socket. Align with pin 1 during installation; avoid hot-plugging.

使用说明

关闭Development Board电源并核对排针方向。
Press the display module evenly onto the GPIO header.
Install the demo driver and select the corresponding rotation.
Perform touch calibration and save parameters.

常见问题

Is slow screen refresh normal?: SPI mode speed is affected by bus frequency and refresh area; partial refresh is preferred.
How to handle touch drift?: Recalibrate and check if the module is under mechanical stress.

资源下载

暂无已发布资源，管理员可在产品表单中添加下载文件。

@@ Line 4: / Line 4: @@
 |型号=TEST-RPI-EXP-03
 |状态=已发布
-|所属模块=RaspberryPi 树莓派MHS& GPIO 显示屏
+|所属模块=Raspberry Pi MHS & GPIO Display
 |主图=Product-TEST-RPI-EXP-03.png
 |副图=Product-TEST-RPI-EXP-03.png
-|简介=通过 GPIO 排针连接的紧凑型触控显示屏演示页，适用于设备面板和原型验证。（独立产品 3）
+|简介=Compact touchscreen display demo page connected via GPIO header, suitable for device panels and prototype validation.(Standalone product  3）
-|产品要点=* 排针直连，减少外部转接线。
+|产品要点=* Direct header connection, reducing external adapter cables.
-* 集成电阻触控区域，适合菜单和状态操作。
+* Integrated resistive touch area, suitable for menus and status operations.
-* 提供可维护的统一产品资料结构。
+* Provides a maintainable unified product documentation structure.
-* 独立产品编号：3。
+* Standalone product ID: 3。
-|显示尺寸=3.5 英寸
+|显示尺寸=3.5 inch
 |分辨率=480 × 320
 |显示接口=GPIO / SPI
-|触控方式=电阻触控
+|触控方式=Resistive touch
 |供电=3.3V / 5V GPIO
-|外形尺寸=约 86 × 56 mm（演示）
+|外形尺寸=Approx. 86 x 56 mm (demo)
-|硬件说明=模块通过双排 GPIO 插座取电并传输显示与触控信号。安装时应对齐一号引脚，避免带电插拔。
+|硬件说明=The module draws power and transmits display/touch signals via dual-row GPIO socket. Align with pin 1 during installation; avoid hot-plugging.
-|使用说明=# 关闭开发板电源并核对排针方向。
+|使用说明=# 关闭Development Board电源并核对排针方向。
-# 将显示模块平行压入 GPIO 排针。
+# Press the display module evenly onto the GPIO header.
-# 安装演示驱动并选择对应旋转方向。
+# Install the demo driver and select the corresponding rotation.
-# 执行触控校准后保存参数。
+# Perform touch calibration and save parameters.
-|常见问题=; 屏幕刷新较慢是否正常？
+|常见问题=; Is slow screen refresh normal?
-: SPI 模式速度受总线频率和刷新区域影响，可优先使用局部刷新。
+: SPI mode speed is affected by bus frequency and refresh area; partial refresh is preferred.
-; 触控漂移如何处理？
+; How to handle touch drift?
-: 重新校准，并检查模块是否受到结构挤压。
+: Recalibrate and check if the module is under mechanical stress.
 |显示模式={{{显示模式|详情}}}
 |卡片页面={{{卡片页面|{{PAGENAME}}}}}
 }}