Toggle menu
Toggle preferences menu
Toggle personal menu
Administrator Login Only
Access is restricted to site administrators.

2.42 inch oled Display: Difference between revisions

From olighker
No edit summary
No edit summary
Line 7: Line 7:
|image2=2.42-oled-800-600-2.jpg
|image2=2.42-oled-800-600-2.jpg
|intro=128*64  SSD1309  24pin
|intro=128*64  SSD1309  24pin
|highlights=* Self-emissive display, no additional backlight needed.
|highlights=''2.42" 128x''64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.
* Compact size, low power consumption, easy to embed in tight devices.
|hardware=== <span style="color: rgb(52, 176, 176);">1.Hardware Wiring</span> ==
* Supports simple I2C connection.
2.42" OLED (SSD1309, IIC Interface) ↔ Arduino Board
* Standalone product ID: 4.
 
|hardware=The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use.
You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.
 
== <span style="color: rgb(52, 176, 176);">2.Compilation & Upload</span> ==
Open the sample code, compile it, upload the code, and perform the final test.
|usage=# Connect power and the I2C bus.
|usage=# Connect power and the I2C bus.
# Scan and confirm the device address.
# Scan and confirm the device address.

Revision as of 23:23, 16 September 2026

OLED Display

2.42-inch OLED
Published
128*64  SSD1309  24pin


Introduction

2.42" 128x64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.

Specifications

Specifications to be added.

Hardware

1.Hardware Wiring

2.42" OLED (SSD1309, IIC Interface) ↔ Arduino Board

You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.

2.Compilation & Upload

Open the sample code, compile it, upload the code, and perform the final test.

Size

  1. Connect power and the I2C bus.
  2. Scan and confirm the device address.
  3. Load the driver matching the resolution.
  4. Draw text and graphics to verify orientation.

FAQ

What if the address cannot be scanned?
Check power, ground, SCL/SDA reversal, and pull-up resistors.
What if the display content is misaligned?
Confirm controller model, resolution, and page addressing mode.

Downloads

暂无Published资源,管理员可在产品表单中添加下载文件。