1.3-inch OLED Display: Difference between revisions
From olighker
More actions
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
* Supports simple I2C connection. | * Supports simple I2C connection. | ||
* Standalone product ID: 2. | * Standalone product ID: 2. | ||
|specs={{{!}} class="wikitable" | |||
{{!}}+ | |||
!Item | |||
!Specification | |||
{{!}}- | |||
{{!}}Size | |||
{{!}}1.30 inch OLED Screen | |||
{{!}}- | |||
{{!}}Resolution | |||
{{!}}128*64 | |||
{{!}}- | |||
{{!}}Interface Type | |||
{{!}}SPI, IIC, 8-bit Parallel | |||
{{!}}- | |||
{{!}}Controller IC | |||
{{!}}SH1106 | |||
{{!}}- | |||
{{!}}Display Color | |||
{{!}}Blue | |||
{{!}}- | |||
{{!}}Active Area | |||
{{!}}29.42 × 14.7 (mm) | |||
{{!}}- | |||
{{!}}Panel Dimension | |||
{{!}}34.5 × 23.0 × 1.4 (mm) | |||
{{!}}- | |||
{{!}}Pixel Pitch | |||
{{!}}0.23 × 0.23 (mm) | |||
{{!}}- | |||
{{!}}Pixel Size | |||
{{!}}0.21 × 0.21 (mm) | |||
{{!}}- | |||
{{!}}Flex Cable Length | |||
{{!}}40 (mm) | |||
{{!}}- | |||
{{!}}Pin Count | |||
{{!}}30pin (0.5mm Top Contact Type) | |||
{{!}}- | |||
{{!}}Viewing Angle | |||
{{!}}Full Viewing Angle | |||
{{!}}- | |||
{{!}}Operating Temperature | |||
{{!}} -40 ~ 70℃ | |||
{{!}}} | |||
|hardware=The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use. | |hardware=The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use. | ||
|usage=# Connect power and the I2C bus. | |usage=# Connect power and the I2C bus. | ||
Revision as of 22:51, 16 September 2026
OLED Display
1.3-inch OLED
Published
128*64 SH1106 30pin
Introduction
- Self-emissive display, no additional backlight needed.
- Compact size, low power consumption, easy to embed in tight devices.
- Supports simple I2C connection.
- Standalone product ID: 2.
Specifications
| Item | Specification |
|---|---|
| Size | 1.30 inch OLED Screen |
| Resolution | 128*64 |
| Interface Type | SPI, IIC, 8-bit Parallel |
| Controller IC | SH1106 |
| Display Color | Blue |
| Active Area | 29.42 × 14.7 (mm) |
| Panel Dimension | 34.5 × 23.0 × 1.4 (mm) |
| Pixel Pitch | 0.23 × 0.23 (mm) |
| Pixel Size | 0.21 × 0.21 (mm) |
| Flex Cable Length | 40 (mm) |
| Pin Count | 30pin (0.5mm Top Contact Type) |
| Viewing Angle | Full Viewing Angle |
| Operating Temperature | -40 ~ 70℃ |
Hardware
The module provides VCC, GND, SCL, and SDA interfaces. Confirm I2C address and host pull-up voltage before use.
Size
- Connect power and the I2C bus.
- Scan and confirm the device address.
- Load the driver matching the resolution.
- Draw text and graphics to verify orientation.
FAQ
- What if the address cannot be scanned?
- Check power, ground, SCL/SDA reversal, and pull-up resistors.
- What if the display content is misaligned?
- Confirm controller model, resolution, and page addressing mode.
Downloads