ESP8266 0.96inch OLED Temperature Humidity Clock Board (blue)
From olighker
More actions
ESP8266
0.96" OLED Clock Board
Published
SSD1306, I2C, BLUE
Introduction
The A8266-096-Clock is a 0.96-inch OLED network desktop clock built around the ESP8266. It retrieves the time automatically from an NTP server over Wi-Fi, supports world time zones and daylight saving time, and can show the current weather, a 3-day forecast, device information and alarm reminders on the OLED. The unit is powered through USB-C and provides a built-in web configuration page, so no extra app is required - a phone or a computer is enough to complete network provisioning and parameter setup.
Specifications
| Component | Description |
|---|---|
| ESP8266 (ESP-12F) | Wi-Fi microcontroller running the main program; handles network, NTP and the web server |
| 0.96" OLED | Blue SSD1306, 128x64 resolution, I2C address 0x3C |
| CH340C | USB-C to serial chip for power supply, firmware upload and 115200 serial output |
| WS2812B | On-board RGB LED for status, weather and alarm indication |
| SELECT button | Connected to GPIO16; a short press switches OLED pages; while ringing, a short press snoozes and a long press turns the alarm off |
| BOOT button | Connected to GPIO0; a 3-second long press shows the configuration hotspot information on screen |
| RST button | Resets the ESP8266 |
| Expansion I/O headers | Headers on both sides expose the common ESP8266 GPIOs for further development |
Hardware
Development Board包含主控区, 存储区, 显示连接器, 调试接口和扩展排针.所有跳线操作应在断电状态完成.
Size
- Connect the debugger or USB data cable.
- 选择对应工具链和Development Board配置.
- Flash the interface self-test firmware.
- Complete wiring and driver configuration per the target display module.
FAQ
- What if unable to enter download mode?
- Check boot button timing, USB driver, and data cable.
- What if peripheral communication is unstable?
- Verify logic levels, ground, bus speed, and terminal connections.
Downloads
暂无Published资源，管理员可在产品表单中添加下载文件。