ESP8266 2.42inch OLED Temperature Humidity Clock Board (blue)
From olighker
More actions
ESP8266
2.42" OLED Clock Board
Published
SSD1309, I2C, BLUE
Introduction
The ESP8266 2.42" OLED Desk Clock is a multifunctional network clock board from OLIGHKER. Based on the ESP-12F Wi-Fi module, it integrates a 2.42-inch 128×64 OLED display, temperature/humidity and barometric pressure sensors, an RGB status LED, an active buzzer and one-touch Wi-Fi provisioning — usable as a desktop clock and as an entry-level ESP8266 IoT development platform.
Specifications
| ESP-12F module | Main controller with integrated ESP8266 Wi-Fi / MCU | — |
|---|---|---|
| 2.42" OLED | 128×64 dot-matrix SSD1309 display | I2C 0x3C |
| AHT20-F | Digital temperature and humidity sensor
|
I2C 0x38 |
| BMP280 | Digital barometric pressure sensor | I2C 0x76/0x77 |
| WS2812B | Full-colour RGB status LED | GPIO12 |
| BEEP | Active buzzer for the alarm | GPIO14 |
| PWR LED | Power indicator LED | — |
| USER LED | User indicator LED | GPIO2 |
| SELECT button | Short press: change page, alarm snooze/dismiss | GPIO16 |
| BOOT button | Hold 3 s to show the setup hotspot info | GPIO0 |
| RST button | Reset button | — |
| USB-C | Type-C power + CH340C serial port | — |
| Expanded I/O | 2.54 mm header exposing GPIO pins | See code definitions |
| 4× mounting holes | M3 through-holes for enclosure mounting | — |
Hardware
Size
FAQ
- What if unable to enter download mode?
- Check boot button timing, USB driver, and data cable.
- What if peripheral communication is unstable?
- Verify logic levels, ground, bus speed, and terminal connections.
Downloads
暂无Published资源，管理员可在产品表单中添加下载文件。