ESP8266 0.96inch OLED Temperature Humidity Clock Board (blue)

Edit Product

ESP8266

0.96" OLED Clock Board

Published

SSD1306, I2C, BLUE

Introduction

The A8266-096-Clock is a 0.96-inch OLED network desktop clock built around the ESP8266. It retrieves the time automatically from an NTP server over Wi-Fi, supports world time zones and daylight saving time, and can show the current weather, a 3-day forecast, device information and alarm reminders on the OLED. The unit is powered through USB-C and provides a built-in web configuration page, so no extra app is required - a phone or a computer is enough to complete network provisioning and parameter setup.

Specifications

Specifications to be added.

Hardware

Development Board包含主控区, 存储区, 显示连接器, 调试接口和扩展排针.所有跳线操作应在断电状态完成.

Size

1. Connect the debugger or USB data cable.
2. 选择对应工具链和Development Board配置.
3. Flash the interface self-test firmware.
4. Complete wiring and driver configuration per the target display module.

FAQ

What if unable to enter download mode?

Check boot button timing, USB driver, and data cable.

What if peripheral communication is unstable?

Verify logic levels, ground, bus speed, and terminal connections.

Downloads

暂无Published资源，管理员可在产品表单中添加下载文件。