ESP32 Arduino Development Board (4MB Flash CH340C)
From olighker
More actions
ESP32
ESP32 UNO D1 R32
Published
Arduino,UNO,4M
Introduction
1.The ESP32 Arduino development board (ESP32 UNO D1 R32) is an opensource development board based on the Espressif ESP-WROOM-32 module.Its Arduino UNO-compatible form factor gives direct access to the rich Arduino shield ecosystem, and it fully supports secondary development.
2.The board breaks out every pin of the ESP32 module and integrates Wi-Fi,Bluetooth 4.2 (BR/EDR/BLE) and an Ethernet MAC, with 4MB Flash and a dualcore processor. Together with the onboard CH340C USB-to-serial chip, a single USB cable handles both power and firmware download — an ideal platform for IoT, smart hardware and embedded development.
Specifications
| Certification | FCC / CE / TELEC |
|---|---|
| Wireless standard | 802.11 b/g/n/e/i,Bluetooth 4.2 (BR/EDR/BLE)
|
| Frequency range | 2.4GHz–2.5GHz (2400M–2483.5M)
|
| Data interface | UART / SPI / I2C / I2S / IR / CAN, GPIO / PWM
|
| Operating voltage | 3.0V–3.6V |
| Operating current | 90mA average |
| Operating temperature | -40°C to 125°C |
| Storage temp. / Flash | Ambient / 4MB Flash |
| Wi-Fi modes | station / softAP / SoftAP+station
|
| Security | WFA, WPA/WPA2, WAPI |
| Encryption | WEP / TKIP / AES |
| Firmware upgrade | Local UART flashing / cloud OTA / host download
|
| Software development | Custom servers supported; SDK available for secondary development
|
| Protocols / User config | IPv4,TCP/UDP/HTTP/FTP; AT+ command set, cloud server, Android/iOS APP
|
Hardware
Size
FAQ
- Is the page content real product data？
: Currently demo data; please replace with actual specs.
Downloads