2.42-inch OLED Display 128*64 (blue)
From olighker
More actions
OLED Display
2.42-inch OLED
Published
128*64 SSD1309 24pin
Introduction
2.42" 128x64 OLED Screen, Multi-interface, 24Pin Soldering Flex Cable, Compatible with ESP32 / Arduino.
Specifications
| Item | Specification |
|---|---|
| Size | 2.42 inch OLED Screen |
| Resolution | 128*64 |
| Interface Type | 8-bit 68**/80** Parallel, SPI, IIC |
| Controller IC | SSD1309 |
| Display Color | Blue |
| Active Area | 55.01 × 27.49 (mm) |
| Panel Dimension | 60.50 × 37.00 × 2.00 (mm) |
| Pixel Pitch | 0.43 × 0.43 (mm) |
| Pixel Size | 0.40 × 0.40 (mm) |
| Flex Cable Length | 36 (mm) |
| Pin Count | 24pin (0.5mm Top Contact Type) |
| Viewing Angle | Full Viewing Angle |
| Operating Temperature | -40 ~ 70℃ |
Hardware
1.Hardware Wiring
2.42" OLED (SSD1309, IIC Interface) ↔ Arduino Board
You need to use the OLED 24P Shield adapter board, together with an Arduino-compatible mainboard. You can freely choose either ESP8266 Arduino Board or ESP32 Arduino Board.
2.Compilation & Upload
Open the sample code, compile it, upload the code, and perform the final test.
Size
FAQ
Q1: What is the driver IC of this OLED screen? What is its resolution?
A1: It adopts SSD1309 driver IC with 128*64 resolution.
Q2: What interfaces does the screen support? What is the specification of the flex cable?
A2: It supports 8-bit 68**/80** parallel, SPI and IIC interfaces. 24pin, 0.5mm top-contact FPC flex cable with 36mm length.
Downloads